2. Front doors to units (doors and trim only, and not any natural cedar) may be repainted in a color selected by the unit owner from a limited palette approved by the Board. The colors that have been approved are manufactured by Sherwin Williams.    Paint color chips are available through the ARC or the Property Manager.  The unit owner may take the color chip to any paint store and have their color selection specially mixed.  

Oil-based, semi-gloss enamel (Trade Name: "Pro-hide Alkyd Satin Enamel") is recommended because latex

paints will not bond properly to the existing oil-based paints.  Be sure to sand and clean the surface prior to

painting. The approved paint colors are shown below.

PCUOA'S APPROVED FRONT DOOR PAINT COLORS

Hot Cocoa  No. 6047                          (Taupe Tone)

Backdrop No. 7025                            (Grey Tone)

Lodge Brown No. 3007                      (Brown Tone)

Arresting Auburn No. 6034                (Raisin Brown Tone)

Hammered Silver No. 2040               (Grey Tone)

Royalcraft Cooper Red No. 2839       (Red Tone)

Polished Mahoney  No. 2838             (Brown Tone)

Royalcraft Bottle Green No. 2847      (Green Tone)

All approved colors are manufactured by Sherwin Williams.

To find a Sherwin Williams location, go to www.sherwinwilliams.com

3. Gas meters and air conditioners may be repainted using enamel, Hot Cocoa No. 6047.

4. Storm or screen doors for the front door only have been approved by the Board. They must be dark brown in color and must be attached to the existing door frame. They should be the "full view" variety with as little concealing metal as possible.

Should you have any questions regarding the above 4 items, please contact any member of the ARC.